Shipbuilding: corrosion protection for ships and marine structures
Salt water is one of the most aggressive environments for steel (categories C5 and CX according to ISO 12944). That is why zinc protection is a standard in shipyards, ports and vessels. This is how a zinc-rich paint such as GALVANOL is used in the marine sector.
Important: for permanently submerged areas, zinc works as a primer within a complete system (for example, with epoxy and antifouling coats). Consult us before defining the system.
Where it is applied
Deck and superstructure: railings, ladders, walkways, cranes, bollards and fittings. This is the most common application and where GALVANOL performs best.
Damage repair: impacts, scuffs, welds and cuts on galvanized elements. See how to repair galvanized welds.
Hull and underwater body: as an anti-corrosion primer under the marine paint system.
Port facilities: pontoons, metal fenders, lamp posts, fencing and quay structures.
Maintenance: recharging zinc on aged galvanizing before red rust appears. See how to recharge old galvanizing.
What thickness do I need in a marine environment
According to GALVANOL tests to ISO 12944-6, with ≥121 µm of dry film C5 is reached with a durability of 15 to 25 years, and with ≥130 µm more than 25 years. In practice that means 3 properly applied coats. Work out the kilos with the calculator.
Tips for saline environments
Wash with fresh water to remove salts before preparing the surface.
Remove rust and loose paint with a wire brush or blasting.
Apply with the surface dry, respecting the times between coats.
If you want a gloss or coloured finish, overcoat with ALINOL or another solvent-based enamel after 4–6 h.
More ideas in how to protect metal near the sea.
Have a project? We are the manufacturer: write to info@galvanol.eu for quotes, samples or technical advice. Technical data sheets and safety data sheets are available in Products.



Comments