ISO 12944 corrosivity categories: what they mean and which thickness to choose
Protecting a structure in a heated building is not the same as protecting one in a port. ISO 12944 classifies environments by how aggressive they are to steel and lets you choose a protection system that matches the expected durability.
The corrosivity categories (ISO 12944-2)
C1 – Very low: heated interiors with clean air (offices, shops).
C2 – Low: rural areas with little pollution; unheated interiors where condensation may occur (warehouses, sports halls).
C3 – Medium: urban and industrial environments with moderate pollution and coastal areas with low salinity; production buildings with humidity.
C4 – High: industrial and coastal areas with moderate salinity; chemical plants, swimming pools.
C5 – Very high: industrial areas with high humidity and aggressive atmosphere, and coastal areas with high salinity.
CX – Extreme: offshore areas and extreme industrial environments.
System durability
ISO 12944 defines four durability classes: low (L, up to 7 years), medium (M, 7 to 15 years), high (H, 15 to 25 years) and very high (VH, more than 25 years). They indicate the time to the first major maintenance, not a guarantee.
Which GALVANOL thickness to choose
According to the results in the GALVANOL technical data sheet (ISO 12944-6, on blast-cleaned steel):
60 µm or more, 1 coat: C2 more than 25 years; C3 15 to 25; C4 7 to 15; C5 up to 7.
80 µm or more, 1-2 coats: C3 more than 25 years; C4 15 to 25; C5 7 to 15.
121 µm or more, 1-2 coats: C4 more than 25 years; C5 15 to 25.
130 µm or more, 2 coats or more: C5 more than 25 years.
For CX environments (ISO 12944-9), the data sheet specifies a 2-coat system with a minimum of 150 µm dry.
How to use this information
Identify the category of the site: look at the distance to the sea, nearby industrial activity and humidity.
Decide the durability you need until the first maintenance.
Choose the thickness and number of coats, and measure the dry film thickness when you finish.
Calculate the quantity with the Products calculator.
How to know which category you're in
Ask yourself three things: is it outdoors? Is there salt in the air (within a few kilometres of the coast)? Is there industrial pollution, slurry or chemicals nearby? If you answer yes to two of them, think C4 or C5 and apply 3 coats.
If you want the table of thicknesses by environment and the consumption, see what GALVANOL thickness each project needs.
Not sure which category your project is in? Write to us at info@galvanol.eu and we'll help you define the system.



Comments