How to protect the metal of houses and structures near the sea
If you have a house, a beach bar, a marina or a warehouse near the coast, you already know: metal lasts half as long. The salt carried by the wind settles on the steel, retains moisture and accelerates corrosion. In the ISO 12944 classification, the coast is normally in category C4 or C5, among the most aggressive.
Why normal paint doesn't hold up on the coast
Salt is hygroscopic: it attracts water even on dry days. As soon as the paint has a microcrack, salt water gets in, rust spreads underneath and the paint lifts. That's why on the coast it's so common to see freshly painted railings full of bubbles the following year.
The solution: zinc + sufficient thickness
Cold galvanizing protects actively: the zinc sacrifices itself instead of the steel, even if the coating is scratched. In addition, GALVANOL is stable against seawater and saline solutions. On the coast we recommend:
3 coats of GALVANOL (about 120 microns dry), which according to ISO 12944-6 tests give more than 25 years in C4 and 15–25 years in C5.
Optionally, a solvent-based topcoat, such as ALINOL, for more barrier and better appearance.
Step by step
Wash with fresh water to remove accumulated salt. This step is often forgotten and it is key.
Remove loose rust and old paint with a wire brush or sandpaper.
Degrease with xylene and let it dry well.
Apply GALVANOL by brush or roller: 3 coats, letting each dry (touch-dry in about 20 min at +20 °C). Pay special attention to welds, bolts and corners.
If you want colour or gloss, apply the topcoat after at least 4–6 hours.
Maintenance
Once a year, rinse railings and gates with fresh water, especially after storms. If you see any knock or deep scratch, touch it up with GALVANOL Spray before rust starts.
How much do I need?
A 10-metre railing has about 4 m² of surface. With 3 coats that's 4 × 3 × 0.25 = 3 kg of GALVANOL. For your specific case, use the calculator and select 3 coats.
Have a project? We are the manufacturer: write to info@galvanol.eu for quotes, samples or technical advice. Technical data sheets and safety data sheets are available in Products.



Comments