How much zinc paint do I need? How to calculate coverage
One of the most common questions before buying is how much zinc-rich paint is needed. Buying too little stops the job; buying too much ties up money. With three figures you have the answer.
The three figures you need
Surface area in m². For sections, multiply the perimeter of the section by the length.
Number of coats. 2 coats are recommended; 3 in marine or very aggressive environments; 1 for touch-ups.
Consumption per coat. GALVANOL uses about 250 g/m² per coat for 40 microns dry, undiluted.
The formula
kg needed = m² × coats × 0.25
Real examples
10 m railing with 40 mm tube and balusters (≈ 4 m²) in 2 coats: 4 × 2 × 0.25 = 2 kg → one can of GALVANOL 2 kg.
Roof structure of 40 m² in 2 coats: 40 × 2 × 0.25 = 20 kg → two pails of GALVANOL 10 kg.
Weld touch-ups (≈ 1 m²): one GALVANOL Spray 500 ml covers about 1 m² at 40–60 microns.
Factors that increase consumption
Very rough or pitted surfaces, or surfaces with heavy rust.
Spray-gun application outdoors in wind (overspray losses).
Sections with many edges, bolts and joints.
As a rule of thumb, add a 10–15% margin. If you'd rather not do the maths, use our How much GALVANOL do I need? calculator: enter the m² and the number of coats and it tells you how many kilos you need.
Have a project? We are the manufacturer: write to info@galvanol.eu for quotes, samples or technical advice. Technical data sheets and safety data sheets are available in Products.



Comments