top of page
Search

Cold galvanizing vs anti-rust paint: what really protects steel

GALVANOL IBERIA SL
1 hour ago
2 min read

Red lead, synthetic primer, "anti-rust" enamel... At the hardware store it looks as if everything protects against rust. But there is a fundamental difference between a conventional anti-rust paint and a zinc-rich coating like GALVANOL, and that difference decides whether you repaint in two years or in fifteen.

Passive protection: anti-rust paint

A conventional primer works like a raincoat: it isolates the steel from water and oxygen. As long as the film is intact, it protects. The problem comes with the first scratch, knock or microcrack. Moisture gets in there, rust spreads underneath the paint and lifts it in blisters. That's why it's so common to see railings that look well painted but flake when you touch them.

Active protection: cold galvanizing

GALVANOL contains 96% zinc in the dry film. Zinc is more "reactive" than iron, so when there is moisture it sacrifices itself instead of the steel. This is called cathodic protection, and it is the same principle as hot-dip galvanizing. If the coating is scratched, the surrounding zinc keeps protecting the bare steel in that area: rust does not spread underneath.

In addition, zinc also acts as a physical barrier, so you get both types of protection at once: active and passive.

Quick comparison

  • If it gets scratched: anti-rust paint lets rust through; cold galvanizing keeps protecting.

  • Durability: with the right thickness, GALVANOL reaches more than 25 years in C3 and C4 environments according to the ISO 12944-6 tests in its technical data sheet.

  • Galvanizing repair: an anti-rust paint is not suitable for touching up hot-dip galvanizing; GALVANOL meets ISO 1461 and ASTM A780 precisely for that.

  • Finish: both can take a topcoat (in GALVANOL's case, solvent-based paints).

When does each one make sense?

An anti-rust primer may be fine for indoor, dry, decorative parts. For anything outdoors, near the sea, in contact with moisture, in the countryside or in industry, cold galvanizing works out cheaper in the long run: you apply it once and forget about it for years.

And if it's already painted with anti-rust paint?

Zinc must be in direct contact with the steel to protect it. That's why the old paint and loose rust must be removed before applying GALVANOL. We explain how in our guide to surface preparation.

Have a project? We are the manufacturer: write to info@galvanol.eu for quotes, samples or technical advice. Technical data sheets and safety data sheets are available in Products.

 
 
 

Comments


Stay informed, subscribe to our newsletter

Thanks for subscribing!

bottom of page