Advantages of single-component zinc-rich paint over conventional systems
Choosing the right coating decides how many years a steel structure lasts without rust. Compared with two-component systems (base + hardener), a single-component zinc-rich paint such as GALVANOL is opened and applied straight away: no mixing, no pot life and no leftovers to throw away. These are its 8 main advantages.
1. Easy application, no mixing
There is nothing to weigh or mix. Stir the container well and apply by brush, roller, spray gun or as a spray. Fewer steps mean fewer mistakes.
2. Fast drying
GALVANOL is touch-dry in about 20 minutes at +20 °C and fully dry in 4 hours, so the structure is back in service sooner. See how to apply zinc-rich paint.
3. Faster on site
With no mixing or induction times, a weld, cut or drill hole can be treated on the spot, right after it is made.
4. High-level corrosion protection
With 96% zinc in the dry film, GALVANOL protects steel cathodically: the zinc sacrifices itself before the iron, just as in hot-dip galvanizing.
5. No risk of mixing errors
In a two-component system, a wrong ratio can ruin the coat. A single-component product always gives the same result as long as you follow the surface preparation.
6. Usable in difficult conditions
The can and pail version can be applied from −30 °C to +60 °C and up to 90% relative humidity (the spray from +5 °C to +40 °C). More details in how to apply cold galvanizing in winter.
7. Less waste
Whatever you don't use is closed and kept for next time. No hardened mix residue ends up in the bin.
8. Lower total cost
Less labour time, less wasted material and less maintenance. To know exactly how much you need, use the How much GALVANOL do I need? calculator.
Conclusion
A zinc-rich single-component coating combines the simplicity of a paint with the cathodic protection of galvanizing. If you have a project, write to us at info@galvanol.eu and we will advise you on format and application.
Have a project? We are the manufacturer: write to info@galvanol.eu for quotes, samples or technical advice. Technical data sheets and safety data sheets are available in Products.



Comments